Plastic Gear Resin Market Size, Share, Growth, and Industry Analysis, By Type (POM, PBT, Nylon Resin, PET Plastic, PC Plastic, and others), By Application (POM Plastic Gears, PBT Plastic Gears, Nylon Resin Plastic Gears, PET Plastic Gears, PC and others), Regional Forecast To 2033

• 

  Request a Free sample to learn more about this report

PLASTIC GEAR RESIN MARKET OVERVIEW

The global plastic gear resin market is anticipated to witness consistent growth, starting at USD 0.51 billion in 2024, reaching USD 0.56 billion in 2025, and climbing to USD 1.22 billion by 2033, with a steady CAGR of 10.03% from 2025 to 2033.

Metal Gears Plastic gears are produced using resin as a material. It is produced using natural gas and petroleum. Different types of polymers, including those with high strength, low friction, and chemical resistance, are used to make the resin used to make plastic gears. They are extensively utilised throughout a number of sectors, including consumer electronics, automotive, and aerospace.

Metal hubs constructed of S45C or stainless steel may occasionally be utilised in applications where there is a significant temperature swing, a big diameter, or a load on the keyway. In these situations, screws are used to join the hub and tooth portions. Two pieces are fused together to create fused gears if they cannot be screwed together. The fused surfaces of KHK's gears are made in such a way that their holding power is greater than their tooth power.

COVID-19 IMPACT

economic imbalance Causes Market Distortion

During COVID-19, the Plastic Gear Resin market was one of many that was impacted by the financial crisis. To stop the corona virus disease from spreading, government officials imposed a state-wide lockdown, which severely affected the movement of raw materials, labour, and industrial cycles. The pandemic's limitations on the tourism sector are one of the key reasons for the decline in demand for the goods. Because of the corona virus illness, people are reluctant to travel even after the restrictions have been lifted. This is a significant component lowering the market's demand.  In addition, the outbreak has a negative impact on the business operations of the enterprises, which affects the market as a whole. The industry has been somewhat impacted by this.

LATEST TRENDS

Availability of the product in different types to Boost the Market Growth

There are different types of plastic Gear resins available. The DSL series makes it simple to fasten axes and gears. To make it easier to machine the holes and key grooves required to secure gears and axes, as well as to strengthen the fastening components of gears and axes where high loads are applied, the NSU and PU series use nylon teeth and metal core. For standard type PR, MC nylon (reinforced plastic) is used. End surface work for the PRF type is carried out using PR as the base, allowing connection with numerous racks. When compared to MC nylon for the DRF series, polyacetal (equal to POM and Dracon) has achieved improved water absorption resistance, lowering the change in rack length brought on by water absorption provides engineering plastic, DM, PB, and DB manufactured from polyacetal and MC nylon. Thus, a key trend that is opening up potential for the industry to grow is the availability of the product in different types. These new developments are mostly to blame for the market's overall growth.

Request a Free sample to learn more about this report

PLASTIC GEAR RESIN MARKET SEGMENTATION

By Type

Based on type, the market is classified into POM, PBT, Nylon Resin, PET Plastic, PC Plastic, High Performance Plastics and others.

By Application

Based on application, the market is categorised into POM Plastic Gears, PBT Plastic Gears, Nylon Resin Plastic Gears, PET Plastic Gears, PC Plastic Gears, High Performance Plastics Gears and others.

DRIVING FACTORS

Favourable characteristics of the product that Gives the Market Extra boost 

Plastic gears have a number of advantageous qualities, including being lightweight, non-rusting, quiet, allowing for cheap cost and high production through injection moulding, and operating without lubrication when coupled with metal gears. On the other hand, there are various factors that call for caution, such as low strength, a propensity to retain heat, significant dimensional change, including backlash when compared to metal, and others. Plastic gears' capacity to withstand temperature change, moisture absorption rate, and chemical resistance all affect how much their dimensions vary. As a result, industry growth will be aided during the forecast period by the growing dependence on products. As a result, the growth, and the increasing advance technologies will boost the market. It will contribute to the expansion of the Advanced Materials industry and it will improve the overall Plastic Gear Resin market growth.

Increasing in the demand for high quality product to Encourage Market Expansion

Due to the rise in demand for lightweight, low-noise, and high torque transmission components from various end-use sectors, the plastic gears resin market is expanding at a healthy rate. During the projected period, the automotive industry is anticipated to be the primary user of plastic gear resins. The global market for plastic gears resin is anticipated to increase as a result of the rising demand for hybrid and electric automobiles. Compared to the metal gear sets used in typical automobiles, plastic gear resins offer superior fuel efficiency. These resins also require less maintenance and are corrosion-resistant. As a result, these factors are collectively promoting market expansion, increasing company revenues. As a result, the increasing demand for high quality product will help the market to boost.

RESTRAINING FACTORS

Infrastructure & Customization and high cost in Product to Impede Market Expansion

Plastic gears resin is susceptible to warping when under stress. This could be harmful if the plastic must function at high temperatures or if the humidity levels vary. greater dimensional instability brought on by increased moisture absorption and thermal expansion coefficient Certain substances may have a harmful impact on plastic gears Costly first moulds are needed to determine the shape and dimensions of teeth. This poses a significant obstacle to market growth during the projection period. This may be a significant issue limiting market expansion. If this problem is fixed, the market will start to grow right away.

• Request a Free sample to learn more about this report

•  

PLASTIC GEAR RESIN MARKET REGIONAL INSIGHTS

North America Dominating the Market Across the Globe

Since this area is the largest user of the product, the market for Plastic Gear Resin in North America has profited from the region's expanding industrial development and several driving factors that have boosted the potential sectors. The expanding need for products in the POM Plastic Gears, PBT Plastic Gears, Nylon Resin Plastic Gears, PET Plastic Gears, PC Plastic Gears, High Performance Plastics Gears industries is one of the primary factors driving the Plastic Gear Resin market share. Rapid urbanization trends will further strengthen the market as a whole.

KEY INDUSTRY PLAYERS

Leading Manufacturers to Boost Product Demand

Data about market participants and their relative positions within the industry are included in the analysis. Data is being gathered and made available through proper research, mergers, technical advancement, growing production facilities, and cooperation. The study on materials contains data on manufacturers, regions, types, applications, sales channels, distributors, traders, dealers, research findings, and more.

List of Top Plastic Gear Resin Companies

• BASF (Germany)
• LG (South Korea)
• DowDupont (U.S.)
• Ticona (U.S.)
• Teijin (Japan)
• Asahi Kasei (Japan)
• SABIC (Saudi Arabia)

REPORT COVERAGE

The study goes into great detail about market segmentation by type and application. The study examines a broad range of participants, including existing and potential market leaders. A considerable market expansion is anticipated as a result of several important factors. In order to provide market insights, the research additionally analyses elements that are probably to boost Plastic Gear resin Market share. The report makes forecasts for market expansion during the projected time period. The objective of the regional study is to explain why one region dominates the worldwide market. There are a lot of issues that have all been carefully considered that prevent the industry from growing. The research also contains a market strategic analysis. It includes thorough market information.