Ultra High Purity Colloidal Silica Market Size, Share, Growth and Industry Analysis, By Type (Particle Size 10-20 nm, Particle Size 20-50 nm, Particle Size 50-130 nm and Others), By Application (Wafer Polishing & CMP Slurry, Coating, Chromatographic Carrier, Catalyst and Others), Regional Insights and Forecast From 2025 To 2033

• 

   Request a Free Sample To Get More Information on this Market

ULTRA HIGH PURITY COLLOIDAL SILICA MARKET REPORT OVERVIEW

The global ultra high purity colloidal silica market size was valued at approximately USD 0.3 billion in 2024 and is expected to reach USD 0.44 billion by 2033, growing at a compound annual growth rate (CAGR) of about 4.4% from 2025 to 2033.

A liquid-borne form of silica is known as colloidal silica. The particles can remain stationary in the liquid because the liquid, which has been electrostatically stabilized, is denser than water. Because of their small size and low density, silica particles are also exceedingly thin. The solution will be cleared of the particles if they are too big. A solution cannot stabilize silica particles if they are too tiny. In addition to bulk delivery, plastic drums and IBCs are also available for the storage of colloidal silica. Generally, electronic-grade colloidal silica is referred to as ultra high purity colloidal silica. Ultra-high-purity colloidal silica's purity ranges from 99.9999% to at least 99.999% depending on the specifics of its application.

COVID-19 Impact: Disruption in Value Chain and Fluctuation in Raw Material Prices were Felt as a Result of the Pandemic

The sudden spike in CAGR is attributable to ultra high purity colloidal silica market growth and demand returning to pre-pandemic levels once the pandemic is over. The global COVID-19 pandemic has been unprecedented and staggering; with the ultra high purity colloidal silica market experiencing lower-than-anticipated demand across all regions compared to pre-pandemic levels.

The strong demand for this substance in the paints and coatings, investment casting, electronics, and semiconductors industries was a major factor driving the colloidal silica industry prior to the COVID-19 pandemic. However, as a result of value chain disruptions brought on by the closure of domestic and international borders in 2020, a number of sectors had to scale back their activities. Prices for raw minerals like silicon fluctuated as a result of the COVID-19 epidemic. In early 2020, the requirement for ultra high purity colloidal silica in coatings and paints declined as a result.

LATEST TRENDS

"To Meet the Growing Demands from End-Markets Nouryon Announced that they are Increasing their Productivity and Customer Service"

To meet the growing demand from the packaging and construction end-markets, Nouryon, a leading manufacturer of specialty chemicals with headquarters in the Netherlands, announced in March 2021 that it would increase its productivity at the Levasil ultra high purity colloidal silica manufacturing plant in Wisconsin. Starting in the second part of 2022, the construction activities are anticipated. A stronger production footprint, improved customer service, and the development of sustainable solutions are all made possible by this expansion for the business.

ULTRA HIGH PURITY COLLOIDAL SILICA MARKET SEGMENTATION

• By Type

Based on type, the market is distributed into Particle Size 10-20 nm, Particle Size 20-50 nm, Particle Size 50-130 nm and Others

• By Application

Based on application, the market is divided into Wafer Polishing & CMP Slurry, Coating, Chromatographic Carrier, Catalyst and Others.

DRIVING FACTORS

"Demand for Customized and Multipurpose Coatings is Encouraging the Use of Colloidal Silica "

As the demand for reinforcing elements for paints and coatings increases, so does the requirement for colloidal silica for coating applications. A further necessity for the implementation of ultra high purity colloidal silica is the consumer demand for multipurpose coatings with strong physical and chemical qualities, which is significantly increasing. Additionally, the growing popularity of customized paints and coatings is encouraging the use of ultra high purity colloidal silica in the coatings industry.

"Growing Awareness for Sustainable and Environmental Products is Driving the Expansion of the Market "

Sales in the market are predicted to increase over the course of the assessment period due to rising awareness for sustainable and environment products in the U.S. The use of ecologically responsible ultra high purity colloidal silica particles by many industries would be required by the U.S. government's enforcement of strict environmental regulations. One of the other reasons that is projected to support the ultra high purity colloidal silica market growth is the swift expansion of the manufacturing sector and the rising consumer understanding of the stability properties of the powder.

RESTRAINING FACTORS

"Use of Safety Gears is Recommended while Working with Colloidal Silica as it has a Dehydrating Impact on the Skin"

Even though it is just somewhat irritating, very high purity colloidal silica is really not considered dangerous. Protectors should always be used because the products may have a dehydrating impact on the skin. It is advised to thoroughly wash the affected area with water in the event of skin contact. Operating with ultra high purity colloidal silica is always advised while wearing safety glasses.

• 

   Request a Free Sample To Get Analysis on Major Geographic Market

ULTRA HIGH PURITY COLLOIDAL SILICA MARKET REGIONAL INSIGHTS

"Rising Demand for Consumer Electronics and Increasing Production Levels by Manufacturers aids Asia Pacific to Lead in the Market"

Asia Pacific is predicted to have the fastest CAGR in the market over the projected period and hold the largest worldwide ultra high purity colloidal silica market share in 2020. In chemical mechanical planarization (CMP) slurries, very high purity colloidal silica is frequently used. In the electronics and semiconductor industries, it is also used as a polishing agent. Additionally, Asia Pacific is recognised as a significant global hub for electronics manufacturing. The Asia Pacific electronics market is flourishing as a result of the rising demand for consumer electronics. Moreover, automotive applications are anticipated to fuel capital spending in the electronics industry in Asia Pacific, despite some industry slowdowns. The consumption for semiconductors is constantly increasing, as was shown in 2020 when it spiked and caused a scarcity of electronics. As a result, numerous manufacturers in the Asia Pacific region are increasing production levels to fulfill the demand for semiconductors, which is helping the market expand.

KEY INDUSTRY PLAYERS

"Creating of High-Quality and Novel Items by the Players to Satisfy Customer Demands "

Suzhou Nanodispersions and Shanghai Xinanna Electronic Technology are two companies that compete in the ultra high purity colloidal silica market. These businesses offer a diverse product portfolio to the market. The businesses are present in the emerging nations, which provide prosperous prospects for the expansion of the colloidal silica industry. To satisfy client demands, industry participants are creating high-quality and novel items.

List Of Top Ultra High Purity Colloidal Silica Companies

• Fuso Chemical (Japan)
• Merck (U.S.)
• Evonik Industries (Germany)
• Nouryon (Netherlands)
• Grace (U.S.)
• Nalco (India)
• Shanghai Xinanna Electronic Technology (China)
• Suzhou Nanodispersions (China)

REPORT COVERAGE

This report covers the ultra high purity colloidal silica market. The CAGR expected to be in during the forecast period, and also the USD value in 2022 and what it is expected to be in 2028. The effect COVID-19 had on the market in the beginning of the pandemic. The latest trends taking place in this industry. The factors that are driving this market as well as the factors that are restraining the growth of industry. The segmentation of this market based on type and applications. The region leading in the industry and why they will continue to do so during the forecast period. Further, the key market players, what all is being done by them to stay ahead of their competition as well as retain their market positions. All these details are covered in the report.