USB Isolators Market Size, Share, Growth, and Industry Analysis, By Type (Compact USB Port Isolators, EMC Tested Rugged Isolators and Others), By Application (Field Service, Unfriendly Electrical Environments and Others), Regional Forecast To 2033

• 

  Request a Free sample to learn more about this report

USB ISOLATORS MARKET OVERVIEW

The USB isolators market stood at approximately USD 3.54 billion in 2024 and is projected to expand to USD 3.79 billion in 2025, eventually reaching USD 6.6 billion by 2033, driven by a CAGR of 7.2% from 2025 to 2033.

The Universal Serial Bus (USB) is a device that allows data to be transferred in both directions: from host to peripheral and vice versa. They frequently consist of two or more connectors, one on each side, with five wires joining them: four for bidirectional data exchange and one specialised ground wire. The USB isolator is a device that allows USB signals to pass from input to output connectors while providing galvanic isolation between them. USB isolators are used in applications where direct USB connections can generate noise, are unreliable, or where isolation is required to protect the USB port or for electrical safety. USB isolators are professional instruments used to avoid and combat ground loops, equalise currents, and guard against over-voltage. The rising demand for ruggedized USB isolators with EMC testing and tiny USB port isolators, which are more expensive than other types of USB isolators, can be credited with the expansion of the global USB isolators market share.

COVID-19 IMPACT

The Pandemic Caused Lockdown Crumbled Down the Market Growth

The emergence of the COVID-19 pandemic had a significant effect on the world economy. Regardless of their size, businesses all around the world saw a severe decline as a result of the COVID-19 virus. Also, numerous governments from all over the world were driven to impose lockdown in their countries in order to control the pandemic's spread, which led to a brief industrial slowdown. People all across the world experienced a lack of numerous goods and services as a result of the industrial closure. Also, the travel restrictions enforced by the government severely interrupted the global supply chain, which led to enormous losses in many different businesses.

LATEST TRENDS

Rising Requirement for Isolated Gate Driver to Advance the Market Share

Isolated gate drivers are in high demand because they offer electrical isolation and strong gate drive capacity, both of which are necessary for the safety and robustness of system architecture. Isolated gate drivers provide dependable control over switching characteristics for configurations of metal oxide semiconductor field-effect transistors, as well as high switching speed and system size constraints, which are necessary for power switch systems, such as silicon carbide and gallium nitride.​

Request a Free sample to learn more about this report

USB ISOLATORS MARKET SEGMENTATION

By Type Analysis

Based on type, the USB isolators market is subdivided into compact USB port isolators, EMC tested rugged isolators and others.

The compact USB port isolators is the leading part of the type segment.

By Application Analysis

Based on the applications, the USB isolators market is subdivided into field service, unfriendly electrical environments and others.

The field service is the leading part of the application segment.

DRIVING FACTORS

Compliance With Rigorous Automotive Safety Requirements to  Amplify the Market Share

Automobile manufacturers all over the world have announced aggressive plans to introduce new battery electric vehicles, plug-in hybrid electric vehicles, and full-hybrid electric vehicles. The BEV rides smoothly, quietly, and emits no emissions. As automotive designs evolve towards electrification, high-wattage power electronics are becoming crucial components in innovative electronic drive-train and battery systems. One of the issues a designer would have when creating solutions for automotive xEV applications is how to transport digital data between low voltage battery domain electronics and high voltage battery domain electronics.

Dynamic Benefits of the USB isolators to Witness Significant Growth and Attract the Market Share

A variety of causes are propelling the adoption of USB Isolators. Some of these include the requirement to safeguard high voltage circuits from low voltage signals, such as those found in digital electrical devices such as Computers and keyboards. Except for USB connections, the increasing popularity of laptops normally does not include an extra external input/output port. The rapid increase in demand for mobile phones and webcams with integrated cameras, which all too often connect via a single universal type (USB) interface. This has resulted in a greater use of tiny USB isolator modules inside robust industrial designs for cabling protection in hazardous or non-friendly locations.

USB isolator devices are essential for use in the field and in harsh conditions. They reduce the risk of electric shock or other hazardous events by allowing electrically powered equipment to be operated safely while also protecting against potentially dangerous events such as lightning strikes or power lines crossing into an area. USB isolators are frequently used in field service locations, such as electricians working on high-voltage lines, where anything connected via normal ports could potentially short out; these would require their own isolated port so they are not at risk themselves while repair.

RESTRAINING FACTORS

Inability to Transmit the Low-Frequency Signals Without Modulators to Restrain the Market Growth

Digital USB isolators are commonly used to transfer high-frequency signals. Modulators are required when delivering low-frequency signals. As a result, digital isolators are only useful in a few situations. High-frequency signals can be sent directly using capacitive/magnetic digital isolators. Magnetic/capacitive digital isolators' isolation layer prevents low-frequency data from passing through. As a result, modulators are used when the frequency range is between 0 and 100 Kbps. As a result, the cost of digital isolators may rise and hamper the USB isolators market growth.

• Request a Free sample to learn more about this report

•  

USB ISOLATORS MARKET REGIONAL INSIGHTS

Asia Pacific Region to Lead  With Presence of Major Electric Equipment and Device Manufacturers

Asia-Pacific accounted for the biggest revenue share of the digital isolator market. The regional market is expanding due to the presence of multiple major electrical equipment and device makers in this region, the digital isolator market. In this area, digital isolators are also extensively used in gate drivers and ADC converters. China is a rising as well as technologically advanced country that contributes considerably to the growth of the Asia Pacific digital isolator market share.

KEY INDUSTRY PLAYERS

The Prominent Players Contributing in the Market Growth

The international, regional, and local players in the brain-computer interface market are well-diversified and the market is moderately competitive. However, a few significant international companies, such Natus Medical Incorporated, Compumedics Ltd, Emotive Incorporation, g.tec medical engineering GmbH, and NeuroSky, control a large portion of the industry thanks to their strong brand names and wide distribution networks. Companies are discovered making investments in cutting-edge technology to provide their clients a digital transformation.

List of Top Usb Isolators Companies

• ANALOG (U.S.A)
• Acromag (U.S.A)
• Adafruit (U.S.A)
• Advantech (U.S.A)
• Comm Front (U.S.A)
• Elektor (The Netherlands)
• Elprotronic (Canada)
• Hifimediy (U.K)
• HiFimeDIY (U.K)
• JCAT (U.S.A)
• Keterex (U.S.A)
• L-com (U.S.A)
• Link Instruments (U.S.A)
• MINMAX Technology (U.S.A)
• Olimex Ltd. (U.K)
• Sealevel (U.S.A)
• Segger (Germany)
• Whaleteq (China).

REPORT COVERAGE

The report examines elements affecting the demand and supply sides and estimates dynamic market forces for the forecast period. The report offers drivers, restraints, and future trends. After evaluating governmental, financial, and technical market factors, the report provides exhaustive PEST and SWOT analysis for regions. The research is subject to alteration if the key players and probable analysis of market dynamics change. The information is an approximate estimate of the factors mentioned, taken into consideration after thorough research.